Setting the X and Y Home Offsets. When setting the X and Y home offsets of your Ender 3, the main goal is to ensure that the nozzle is right on top of the bottom-left corner of the print bed when the positions of the X and Y axes are set to 0. For this process, the first step you will need to take is homing your Ender 3 by pressing on the Auto
3. Homing is the process where the machine finds all the limits of the 3 axis (at the endstop switches), to have a common reference point for each axis. From the endstops, firmware defined values exist to give the printer head the offset to the home position, also known as origin (X=0, Y=0). If the origin position is in front of the plate The fix is to either adjust the magnet with a hex key, or to replace the tip, or to replace the bl touch. Ironically, this issue fixed itself once I showed my coworker how to fix it. I was showing him "When you turn it on, it should go like click-click", and then just worked like normal. 1. Print3DWorld. gordonendersby Re: z-axis not getting to end stop when homing August 10, 2014 10:52AM Registered: 9 years ago Posts: 286 Had a go again today with clear head. Long day yesterday. I tried setting min_software_enstops = false All this does is allow me to go past the end stop while i command the axis to move either through pronteface or the lcd menue.